|
|
|
Qty 1 Includes 2 Wheels. Order Qty 2 for 4 Wheels.
Great performance and durable while offering a smooth ride. These longboard wheels are my favorite on my Loaded Bamboo Vanguard. Get a softer duro for that "ride like my snowboard" feel or the harder duro for better sliding. These are some of our most popular wheels! These can be used for Tight and Hybrid Slalom. Highest level of traction and faster top end speed make a great downhill wheel. Fast, smooth, ultra high traction!
Name: Grippins
Hub Setting: Centered
Height: 70mm
Depth of Urethane: 22.5 mm
Width: 52mm
Edges: Squared with deep cut to hub
Contact Patch: 50.5mm
Hub: 25mm
SET OF 2
Abec11 Grippins 70mm Longboard Wheels Set of 2
Manufacturer: Abec11 Skateboard Wheels
Manufacturer Part No: DBS-134930
Product Reviews
| (27 Ratings, 12 Reviews) |
Average Rating:
|
Pretty darn good
Honey rider
(MD)
10/29/2011 3:54 PM
I got these in the middle of summer and they are pretty nice (81a). Not the best but still very solid in performance. I would give them a 7.5/10 on grip and the same for sliding. They are very good for an all around wheel. You cant hold them out too long for standies but you can pre drift and do other slides without trouble. They also break in very fast and do not wear that fast. Although they do chunk a little bit, but its not bad at all. I like them a lot, but I would check out zig zags first. Happy Riding!
|
Beautiful
Anonymous
(Forest Grove, OR)
3/22/2010 6:07 PM
When I got these wheels, I used them solely for bombing, as I had a set of wheels that I thought slid pretty well. These wheels grip like no other through the corners and ride extremely smooth, making commuting bearable.
After several weeks of solely bombing, I decided to try to slide on them. Right off the bat, they slid like a dream. They slid so well, I hunkered down in my favorite sliding area and slid on them for ten hours in two days. The next day, I bombed a couple windy hills at about 35MPH and they still gripped like no other and rode extremely smoothly.
These wheels + DBS Abec7 bearings = Awesome combo
|
Grippy!!!
eddie torres
(utah)
6/6/2009 10:23 PM
Just broken in a pair and they are crazy grippy! They tend to chatter in the slides but other than that I have no complaints.
|
which
Anonymous
(Unknown)
5/28/2008 7:17 PM
Im makin a cruising/carving board im wondering what would be better these or the Sector 9 75a Nineballs. Or anything else. If these what durometer would be good? i want somethin that can roll lots of things with good grip.
Dan Loveland Writes - These will work good for you. I would go with the Grippins in a hard durometer like 81a or 84a so that you get a nice glide. The Grippins are really grippy and soft.
|
Orgasmic
Anonymous
(Unknown)
6/24/2008 9:03 PM
These are really smooth. I got the softest type and they flow like j*zz. They grip really well and bend softly so when you make sharp turns, the wheels always stay on the ground so it has a lot of grip. The great thing is they are centered so if the wheel cones and you flip it around, its like new again so the wheel lasts twice as long as other types. These are my favorite wheels and they are really durable.
|
|
Specifically designed for skateboarding these are the IDS Oust MOC 7 Speed Skateboard Bearings Set of 8
|
From Motion Longboards The Longboard Sliding Gloves With Removable Slide Puck
|
Abec11 Biltin Abec 7 Precision Skateboard Bearings feature biltin spacers and rated Abec 7
|
Use this tool to adjust your skateboard trucks or replace your deck.
|
From Khiro Skateboard Products Aluminum Wheels Spacers 8mm x 8mm Set of 4
| | | |
|
|
|