Free Shipping - No Minimums




General Help & Product Questions

Order Changes

(Please also read our Order Changes Page)

Want us to look at a new product?


888.779.7062 Toll Free

Daddies Board Shop

5909 NE 80th Ave.

Portland, OR 97218

Retail Hours:

Mon–Fri 11–8

Saturday 11–7

Sunday 11–6

All hours PST

Buzzed Precision Trucks - Black
Buzzed Precision Trucks - Black
  • Size:172mm
  • Style:Reverse Kingpin
  • Cruising
  • Freeride
  • Downhill
  • Push
  • Sliding

Buzzed Precision Trucks - Black - SET OF TWO



Out of Stock

Quick Overview

Buzzed Precision Trucks - Black

[Email me when it's back in stock]


Buzzed Precision Trucks

This Set of 2 Trucks includes:

  • 2 Hangers
  • 2 Baseplates
  • 2 Kingpins
  • 4 Axles Nuts
  • 2 Kingpin Nuts


  • Baseplate: 47 Degree
  • Offset Pivot: + / -2 Degrees
  • Titanium Insert
  • CNC Machined Delrin Pivot Cups
  • 50% Stronger
  • Lightest Trucks On The Market

BUSHINGS AND WASHERS NOT INCLUDED - Prefered Bushings Riptide APS Fatcone

Get Buzzed: Just Figure Out the Bushing Setup
I've had these trucks for about 6 months now and I've finally figured out the best bushing setup for me was the Purple 86a Otang Nipple Bushings, with the short bushing boardside and the tall bushing road side. Double Barrel Riptides also work great but I prefer the Otangs for fast freeride they feel fantastic. Some of the greatest differences I've found with Buzzed Trucks compared to most cast trucks such as Caliber trucks are as follows:

-All four wheels stay on the ground without a problem when throwing slides, you can tell by your thane lines and this allows for much more even wear and longer life for your wheels

-The stability is excellent as there is no slop in the bushing seat

-For maintenance you need to either put some dish soap or speed lube in the Delrin Pivot cup to make sure that your hanger can turn with ease and doesn't catch anywhere

-If you're trying to decide what size to go, depending on the size of your board I recommend either using the 186mm or the 179mm as most boards are within that range. I personally use the 186mm and they're fantastic on setups like the Rayne Vandal or Subsonic Killjoy, Racecar, any drop down or drop through setup, and any 9"-10" wide top mount

-You WILL need Half Inch risers and long enough hardware (which DBS offers 2" Hardware which works) when you purchase these trucks, they lean like none other and you are more prone to get wheel bite without risers.

-Also when it comes to maintenance when putting on bearings make sure that the nut on each side of the hanger is all the way tightened and locked or else it can fall off and that is not fun when you're going fast into a slide. I only had issues with Zealous bearings with this because there wasn't enough room to tighten the bearings down all the way.

-I recommend either Oust bearings, Bones Reds, or DBS regular or Built-in DBS bearings. Get some Caliber Spacers with speed rings and you'll be good to go.

-I run my trucks at 45 degrees so that I don't have to mess with putting two washers on the baseplate, it's nice not needing a washer on the bushing that sits on the baseplate as the baseplate acts as an Amish Washer. Otherwise get Amish Washers as they are made for these trucks and work great! Plus at 45 degrees the trucks feel great for freeride as well as downhill

-Buzzed can take a BEATING! I've hit ramps with my Buzzed going about 10-15mph and getting about 5 feet of air and landed no problem, I have yet to bend these hangers :)

-They don't like the rain, and I had the unfortunate experience of riding with them in the rain but WD-40 took all the rust spots off just fine and I dried them and haven't had an issue since :)

My recommendation:

Buy Them :) They Rock
Email to a Friend

Order ship out within one business day. We'll give you 10% off your order if it doesn't. In fact, over 90% of orders placed Monday-Friday before 3pm EST ship the same day. Check out our Fast Shipping Guarantee for details.

Shipping Options & Times

Options Transit Time Method(s)
Economy 4-8 business days UPS Ground, UPS SurePost*, USPS
Standard 1-6 business days UPS Ground, USPS
USPS Priority Mail 2-3 business days
USPS has a 93% on time success rate but transit time is not guaranteed
USPS Priority Mail
1 business day
2 business days
3 business days
UPS Next Day Air
UPS Second Day Air
UPS 3-Day Select

Please note that the above times EXCLUDE the actual day of shipment with the exception of UPS Next Day Air if the order is placed by 3:00pm EST. The first day in transit begins the day after we ship.


Daddies UPS Transit Map

Daddies defines a business day as 7:00am - 5:00pm PST, Monday - Friday. Business days exclude official US holidays (e.g. Christmas, Labor Day, Memorial Day) and the days before and after the US Holiday, which are frequently observed by our shipping carriers as holidays.

*UPS SurePost is a joint venture between UPS and the Post Office where your order will be shipped via UPS to your local Post Office and then the Post Office will deliver your order to you. With SurePost, tracking information is available between our warehouse and the Post Office. Once you package reaches the Post Office, tracking information will not be updated. Typically your order will arrive 1-3 business days after it reaches the Post Office. That transit time is reflected in the estimates above.

Shipping Rates

Shipping Rates are calculated as you add products to your shopping cart, prior to checkout.

Military Addresses

We ship USPS mail to APO and FPO addresses. You can view shipping costs in your shopping cart prior to checkout.

99.9% of all orders ship out within one business day! In fact, over 90% of orders placed Monday-Friday before 3pm EST ship out the same day. These are not just pretty words. We stand behind this commitment with our Fast Shipping Guarantee.

Here's the guarantee: if we don't ship out within one business day, we will give you 10% off your order. See here for details.

The readers of Concrete Wave, the leading longboard publication, generously named Daddies the best online longboard shop of 2012. And we didn’t even have to bribe them!

Daddies has a few other feathers in its cap. We have been an Inc. 5000 Fastest Growing Company in the United States for the last three years and a Portland Business Journal Top 100 Fastest Growing Private Company for the past five years (our home is in Portland, Oregon). Our goal with all of this fast growth is clear: world domination! Well, that and being in the Guinness Book of World Records for the longest fingernails.

We price match. And we'll give you 5% off for doing it.

We want to give you the best prices and best customer service. We know that nobody ever, ever, ever beats our customer service. But, we’re also going to take care of you if someone dares to try and beat us on price! See here for details.


This month, all orders over $19.95 get the newest sticker of the month. This month's sticker, by artist Ryan Flowers, goes out to all the city slashers and street cruisers out there who work up a sweat on the regs pushing home to chomp some dinner.

As always, every order will come with two free classic Daddies stickers at no cost. We know... we're sweet.


Daddies Board Shop Help and Contact Us