|
|
|
Khiro 1/2" 60a Angled Skateboard Risers Choose your riser pad size according to your wheel size and truck height. For example if you have a pool setup with 64mm wheels you will need a 1/4 inch riser. If you are using a street board with 58mm wheels use a 1/8 riser. If you are using Independent Trucks on your longboard you will need 1/2 inch risers. If you want to increase the turnability of your Independent Truck choose an angled 1/2 inch riser pad. Sold in Pairs of 2.
Item Number: AQ005E3
Khiro 1/2" 60a Angled Skateboard Risers
Manufacturer: Khiro Skateboard Accessories
Manufacturer Part No: DBS-135526
Product Reviews
| (7 Ratings, 2 Reviews) |
Average Rating:
|
Simulate the evo!
Oskar
(Sweden, stockholm)
3/14/2012 10:37 AM
These risers are obviously no big different than any other angled riser but it did anyway really come in handy for me. I own a Landyachtz Switch and with these two I was able to create pretty much the same feel of the landyachtz evo or chinook by putting the front riser so it was wedged and the tail riser so the trucks angle was de-wedged, plus I did cut a few other thin risers in half to make the truck angle even more.
Over all solid riser but as I said no big difference maybe a little soft for me but it makes your board feel somewhat flexy .
|
Shock Pads?!!
John Doe
(MIA)
6/19/2009 11:59 AM
Since the riser is 60a I am assuming this is a soft angled riser and therefore will function as a shock pad also? Please help me confirm this and thanks for your help!!! --- Dan Loveland Writes- Yes, this is a 60a durometer angled skateboard riser. Have a good weekend.
|
|
|
|
|