WORKS ON ANY DROP THRU BOARD & TRUCKS!

Loaded Dervish Shock Pad and Washer Kit

This kit contains four (4) shock pad strips (two for each truck mounting) and eight (8) hardware mounting washers to assemble your Drop-Thru longboard. These shock pads fit ANY truck and the slots accomidate the Randal R-II baseplate "wings"

Most important are the mini washers to place between the bottom of your deck and the hardware nut. These washers will protect your board from having the nut sink into the bottom sheet. Like a camel on the sand, the wider footprint of the washer will distribute the pressure and keep the nut from sinking!

The shock pad is less than 1/8" and will not require the use of longer hardware.

1 Inch Panhead or Button hardware is what we recommend for the Loaded Dervish.

Some other Landyachtz boards will require 1.25" hardware.

Quantity '1' will take care of one complete longboard.

Product Reviews

(137 Ratings, 3 Reviews)

Average Rating:

they do fit Nick Eddy (Spokane WA) 6/14/2010 9:02 PM I just put them on my RIIs the trick is to put the bolts through the base plate then put the shock pads on then slide the bolts through the board, tighten the bolts with the nuts then finish putting the truck together

Fit Ragger (Norway) 4/29/2009 10:31 PM I swear, they will fit. Just a little hard to put on.

Good but doesn't fit RII Chris (Paris, France) 4/5/2009 1:01 PM Just a word of warning - these will have to be cut slightly to fit RII in order for the bolt holes to line up with those in the trucks. However, once modified they will work perfectly!